| Related Modules mod_include mod_cgi mod_expires |
Related Directives Options XBitHack AddType AddHandler BrowserMatchNoCase |
This HOWTO first appeared in Apache Today (http://www.apachetoday.com/) as a series of three articles. They appear here by arrangement with ApacheToday and Internet.com.
This article deals with Server Side Includes, usually called simply SSI. In this article, I'll talk about configuring your server to permit SSI, and introduce some basic SSI techniques for adding dynamic content to your existing HTML pages.
In the latter part of the article, we'll talk about some of the somewhat more advanced things that can be done with SSI, such as conditional statements in your SSI directives.
SSI (Server Side Includes) are directives that are placed in HTML pages, and evaluated on the server while the pages are being served. They let you add dynamically generated content to an existing HTML page, without having to serve the entire page via a CGI program, or other dynamic technology.
The decision of when to use SSI, and when to have your page entirely generated by some program, is usually a matter of how much of the page is static, and how much needs to be recalculated every time the page is served. SSI is a great way to add small pieces of information, such as the current time. But if a majority of your page is being generated at the time that it is served, you need to look for some other solution.
To permit SSI on your server, you must have the following directive
either in your httpd.conf file, or in a
.htaccess file:
Options +Includes
This tells Apache that you want to permit files to be parsed for SSI directives.
Not just any file is parsed for SSI directives. You have to tell
Apache which files should be parsed. There are two ways to do this. You
can tell Apache to parse any file with a particular file extension,
such as .shtml, with the following directives:
AddType text/html .shtml
AddHandler server-parsed .shtml
One disadvantage to this approach is that if you wanted to add SSI
directives to an existing page, you would have to change the name of
that page, and all links to that page, in order to give it a
.shtml extension, so that those directives would be
executed.
The other method is to use the XBitHack directive:
XBitHack on
XBitHack tells Apache to parse files for SSI directives
if they have the execute bit set. So, to add SSI directives to an
existing page, rather than having to change the file name, you would
just need to make the file executable using chmod.
chmod +x pagename.html
A brief comment about what not to do. You'll occasionally see people
recommending that you just tell Apache to parse all .html
files for SSI, so that you don't have to mess with .shtml
file names. These folks have perhaps not heard about
XBitHack. The thing to keep in mind is that, by doing
this, you're requiring that Apache read through every single file that
it sends out to clients, even if they don't contain any SSI directives.
This can slow things down quite a bit, and is not a good idea.
Of course, on Windows, there is no such thing as an execute bit to set, so that limits your options a little.
In its default configuration, Apache does not send the last modified date or content length HTTP headers on SSI pages, because these values are difficult to calculate for dynamic content. This can prevent your document from being cached, and result in slower perceived client performance. There are two ways to solve this:
XBitHack Full configuration. This tells
Apache to determine the last modified date by looking only at the date
of the originally requested file, ignoring the modification date of
any included files. SSI directives have the following syntax:
<!--#element attribute=value attribute=value ... -->
It is formatted like an HTML comment, so if you don't have SSI correctly enabled, the browser will ignore it, but it will still be visible in the HTML source. If you have SSI correctly configured, the directive will be replaced with its results.
The element can be one of a number of things, and we'll talk some more about most of these in the next installment of this series. For now, here are some examples of what you can do with SSI
<!--#echo var="DATE_LOCAL" -->
The echo element just spits out the value of a
variable. There are a number of standard variables, which include the
whole set of environment variables that are available to CGI programs.
Also, you can define your own variables with the set
element.
If you don't like the format in which the date gets printed, you can
use the config element, with a timefmt
attribute, to modify that formatting.
<!--#config timefmt="%A %B %d, %Y" -->
Today is <!--#echo var="DATE_LOCAL" -->
This document last modified <!--#flastmod file="index.html" -->
This element is also subject to timefmt format
configurations.
This is one of the more common uses of SSI - to output the results of a CGI program, such as everybody's favorite, a ``hit counter.''
<!--#include virtual="/cgi-bin/counter.pl" -->
Following are some specific examples of things you can do in your HTML documents with SSI.
Earlier, we mentioned that you could use SSI to inform the user when the document was most recently modified. However, the actual method for doing that was left somewhat in question. The following code, placed in your HTML document, will put such a time stamp on your page. Of course, you will have to have SSI correctly enabled, as discussed above.
<!--#config timefmt="%A %B %d, %Y" -->
This file last modified <!--#flastmod file="ssi.shtml" -->
Of course, you will need to replace the ssi.shtml with
the actual name of the file that you're referring to. This can be
inconvenient if you're just looking for a generic piece of code that
you can paste into any file, so you probably want to use the
LAST_MODIFIED variable instead:
<!--#config timefmt="%D" -->
This file last modified <!--#echo var="LAST_MODIFIED" -->
For more details on the timefmt format, go to your
favorite search site and look for ctime. The syntax is the
same.
If you are managing any site that is more than a few pages, you may find that making changes to all those pages can be a real pain, particularly if you are trying to maintain some kind of standard look across all those pages.
Using an include file for a header and/or a footer can reduce the
burden of these updates. You just have to make one footer file, and
then include it into each page with the include SSI
command. The include element can determine what file to
include with either the file attribute, or the
virtual attribute. The file attribute is a
file path, relative to the current directory. That means that
it cannot be an absolute file path (starting with /), nor can it
contain ../ as part of that path. The virtual attribute is
probably more useful, and should specify a URL relative to the document
being served. It can start with a /, but must be on the same server as
the file being served.
<!--#include virtual="/footer.html" -->
I'll frequently combine the last two things, putting a
LAST_MODIFIED directive inside a footer file to be
included. SSI directives can be contained in the included file, and
includes can be nested - that is, the included file can include another
file, and so on.
In addition to being able to config the time format,
you can also config two other things.
Usually, when something goes wrong with your SSI directive, you get the message
[an error occurred while processing this directive]
If you want to change that message to something else, you can do so
with the errmsg attribute to the config
element:
<!--#config errmsg="[It appears that you don't know how to use SSI]" -->
Hopefully, end users will never see this message, because you will have resolved all the problems with your SSI directives before your site goes live. (Right?)
And you can config the format in which file sizes are
returned with the sizefmt attribute. You can specify
bytes for a full count in bytes, or abbrev
for an abbreviated number in Kb or Mb, as appropriate.
I expect that I'll have an article some time in the coming months
about using SSI with small CGI programs. For now, here's something else
that you can do with the exec element. You can actually
have SSI execute a command using the shell (/bin/sh, to be
precise - or the DOS shell, if you're on Win32). The following, for
example, will give you a directory listing.
<pre>
<!--#exec cmd="ls" -->
</pre>
or, on Windows
<pre>
<!--#exec cmd="dir" -->
</pre>
You might notice some strange formatting with this directive on
Windows, because the output from dir contains the string
``<dir>'' in it, which confuses browsers.
Note that this feature is exceedingly dangerous, as it will execute
whatever code happens to be embedded in the exec tag. If
you have any situation where users can edit content on your web pages,
such as with a ``guestbook'', for example, make sure that you have this
feature disabled. You can allow SSI, but not the exec
feature, with the IncludesNOEXEC argument to the
Options directive.
In addition to spitting out content, Apache SSI gives you the option of setting variables, and using those variables in comparisons and conditionals.
Most of the features discussed in this article are only available to you if you are running Apache 1.2 or later. Of course, if you are not running Apache 1.2 or later, you need to upgrade immediately, if not sooner. Go on. Do it now. We'll wait.
Using the set directive, you can set variables for
later use. We'll need this later in the discussion, so we'll talk about
it here. The syntax of this is as follows:
<!--#set var="name" value="Rich" -->
In addition to merely setting values literally like that, you can
use any other variable, including, for example, environment variables,
or some of the variables we discussed in the last article (like
LAST_MODIFIED, for example) to give values to your
variables. You will specify that something is a variable, rather than a
literal string, by using the dollar sign ($) before the name of the
variable.
<!--#set var="modified" value="$LAST_MODIFIED" -->
To put a literal dollar sign into the value of your variable, you need to escape the dollar sign with a backslash.
<!--#set var="cost" value="\$100" -->
Finally, if you want to put a variable in the midst of a longer string, and there's a chance that the name of the variable will run up against some other characters, and thus be confused with those characters, you can place the name of the variable in braces, to remove this confusion. (It's hard to come up with a really good example of this, but hopefully you'll get the point.)
<!--#set var="date" value="${DATE_LOCAL}_${DATE_GMT}" -->
Now that we have variables, and are able to set and compare their
values, we can use them to express conditionals. This lets SSI be a
tiny programming language of sorts. mod_include provides
an if, elif, else,
endif structure for building conditional statements. This
allows you to effectively generate multiple logical pages out of one
actual page.
The structure of this conditional construct is:
<!--#if expr="test_condition" -->
<!--#elif expr="test_condition" -->
<!--#else -->
<!--#endif -->
A test_condition can be any sort of logical comparison -
either comparing values to one another, or testing the ``truth'' of a
particular value. (A given string is true if it is nonempty.) For a
full list of the comparison operators available to you, see the
mod_include documentation. Here are some examples of how
one might use this construct.
In your configuration file, you could put the following line:
BrowserMatchNoCase macintosh Mac
BrowserMatchNoCase MSIE InternetExplorer
This will set environment variables ``Mac'' and ``InternetExplorer'' to true, if the client is running Internet Explorer on a Macintosh.
Then, in your SSI-enabled document, you might do the following:
<!--#if expr="${Mac} && ${InternetExplorer}" -->
Apologetic text goes here
<!--#else -->
Cool JavaScript code goes here
<!--#endif -->
Not that I have anything against IE on Macs - I just struggled for a few hours last week trying to get some JavaScript working on IE on a Mac, when it was working everywhere else. The above was the interim workaround.
Any other variable (either ones that you define, or normal
environment variables) can be used in conditional statements. With
Apache's ability to set environment variables with the
SetEnvIf directives, and other related directives, this
functionality can let you do some pretty involved dynamic stuff without
ever resorting to CGI.
SSI is certainly not a replacement for CGI, or other technologies used for generating dynamic web pages. But it is a great way to add small amounts of dynamic content to pages, without doing a lot of extra work.